Leak Detection

For more specific information regarding your personal mold testing questions and concerns, call PrimeAire to speak to a LIVE certified technician

Leak Detection In NYC?

While it is true that leaks are more common in older properties, newer properties can have problems too. Poor construction and corrosion, and in many cases, ground movement can cause unexpected pipe damage at any time. If undetected, the problem threatens property and causes contamination.

If your mold inspection is not conducted with infrared thermal imaging, your mold inspection may be inconclusive.

Moisture detected in a first floor bathroom ceiling caused by a leaking shower on the second floor.

Moisture detected in a first floor bathroom ceiling caused by a leaking shower on the second floor.

Moisture detected in a first floor ceiling caused by an improperly sealed shower door gasket above.

Moisture detected in a bedroom ceiling caused by a roof leak.


Moisture detected in a first floor kitchen ceiling caused by a leak under a second floor kitchen sink.

Moisture detected in a bedroom closet ceiling caused by a roof leak.

Moisture detected in a bedroom ceiling caused by an improperly installed drain in a second floor deck.

Call PrimeAire Mold Services to speak to a Live Certified Mold Professional today.

Mold often grows behind walls and inside ceiling and floor cavities long before it is ever detected. By the time you start smelling an unpleasant odor, rest assured mold has been growing somewhere for some time and every day is growing more. If you suspect you have mold growing indoors, the time to act is sooner rather than later.

Mold Specialist NYC in Mold Inspection NYC Apartment
Testimonial

Here’s what our customers say

Giving the fresh air back to the household

Why Choose Us

Mold Inspection Testing & Equipment

  • Air and moisture tests
  • Swab sample
  • Surface sampling
  • Dust sampling
  • Tape lift sampling
  • Inner wall checks
  • Laser particle counters
  • Hyrometers
  • Optic borescopes
  • Leak detection
  • Thermal imaging(infrared)
* We work with the most skilled, equipped and accredited labs. Analytical accuracy and fast turnaround is our top priority. All mold & toxic mold tests and samples are sent to an accredited laboratory to perform an analysis and most results are available to the client within 48–72 hours.

Primary Objectives of Mold Sampling

  • Confirm or rule out the probability that mold is originating from a suspect condition indoors
  • Assess the potential for property damage caused by mold without invasive procedures
  • Assess the potential negative impact of mold on indoor air quality

Goals of Our Mold Investigation

  • Determine if there is a mold or toxic mold infestation problem
  • Determine the cause of the mold or toxic mold infestation problem
  • Determine the extent of the mold or toxic mold infestation problem

Types of Mold Testing Include

  • Air Testing using Air Cassettes
  • Wall Check Cassettes
  • Carpet Check Cassettes
  • Bulk, Swab & Wipe Samples
  • Tape Lift Samples
  • Clearance Testing

Mold Testing Involves Collecting Samples

  • Identify the type of mold present
  • Quantify the level of mold present

3 Most Common Types of Samples Used in a Mold Inspection

  • Surface samples (testing mold growth on surfaces)
  • Air samples (testing airborne mold spores)
  • Dust samples (mold DNA analysis)
Hidden Mold in NYC | PrimeAire Mold Services

We use safe and environmentally friendly measures.

Our Mold Inspection Reports are our pride, digital, organized, easy to read and very well documented providing pertinent Mold Removal guidelines.

The following are some of the potential property conditions which warrant a professional mold inspection:

Mold Inspection NYC

Frequent Condensation on Window

Cause : Improper window seal, moisture retention inside wall cavities, temperature-humidity regulation.

Consequences: Moisture seeps past window frame and into wall cavity causing water damage and mold growth inside wall.

Surface Mold On Window Sill

Cause : Improper window seal, moisture retention inside wall cavities, temperature-humidity regulation.

Consequences: Moisture seeps past window frame and into wall cavity causing water damage and mold growth inside wall.

Surface Mold Inside Window

Cause : Improper window seal, moisture retention inside wall cavities, temperature-humidity regulation.

Consequences: Moisture seeps past window frame and into wall cavity causing water damage and mold growth inside wall.

Bathtub/Shower Mold

Cause: Water leaks due to cracked or inadequately sealed grout, plumbing leas inside wall, etc.

Consequences: Mold comes back with a few days after cleaning, severe water damage, degradation of construction materials, and mold growth inside wall cavities.

Mold, Dry Rot, Water Damage on Eaves

Cause: Damaged or improperly installed roofing paper or tiles.

Consequences: Severe water damage, degradation of construction materials, and water damage and mold growth spreading under shingles, onto sub-roof materials.

Roof Leak

Cause: Damaged or improperly installed shingles.

Consequences: Water damage and mold growth spreading under shingles, eventual on attic and interior construction materials.

Over-Exposure to Water on Stucco

Cause: Sprinklers, poor drainage, excessive ground water, covered weep screed, etc.

Consequences: Water damage and mold growth on stucco and inner-wall materials and interior walls of the structure.
Common Questions

Frequently Asked Questions

For detailed information or to request a quote, Call PrimeAire Mold Services at 1-877-307-5166 to speak to a Live Certified Mold Professional today.

Mold is a simple organism found everywhere, indoors and outdoors. Mold spores are microscopic (tiny and lightweight) and travel through the air we breathe. Airborne mold spores in large numbers are a known allergen that can cause allergic reactions, asthma episodes, infections, and other respiratory problems for people, especially children and elderly individuals.

Molds can be a major source of building sickness but not the only potential cause. Other issues can cause building sickness.

People living in or working in dwellings with building sickness have symptoms similar to a mild case of influenza (the flu) with the signs and symptoms disappearing within a few hours of leaving the building. Headaches, fatigue, and respiratory problems can also be experienced by people exposed to sick buildings.

Mold will grow in an environment that is warm, moist and unventilated. Once airborne, mold spores can be spread throughout your structure via the air duct system.

Mold can grow within areas of the house / building that you do not see. Wherever there is exposure to water and a mold "food source" such as cellulose (a component of wallboard), mold can grow. Areas such as the interiors of walls, showers and bathrooms, crawl spaces, attics, drywall tape, cracked plasterboard and dampened carpets are a few discovery areas for mold exposure.

New building methods make buildings better insulated and thus more likely to retain molds within the structure. Buildings are more airtight and any unventilated moisture that gets inside stays trapped inside, allowing mold to grow and spread rapidly.

Molds will grow any time the environment is favorable. Molds can be introduced into the house / structure when the building is under construction or after completion through events such as water damage from leaky pipes, roof leaks, sink, tub, or toilet overflows, cracks in the sealant around tubs /showers and use of inadequate materials during construction. There are documented cases demonstrating the damage caused by contractors allowing building materials to become wet during construction.

See examples of recent mold damage coverage: Forbes magazine: "The Fungus That Ate Sacramento;" CBS News: "Black Mold - Creeping Destruction;" CBS News/ 48 Hours: "Brockovich Takes on a New Foe: Mold;" CBS News/48 Hours: "An Insidious Mold."

 

In the past, insurance companies have covered mold repairs, but this is changing. Due to litigation and expensive repairs that can be incurred, insurance companies are now starting to consider mold issues a "maintenance issue" even if it costs thousands of dollars to repair/replace walls, etc. Please consult your insurance policy to see if you are covered.

It is possible to clean up visible (surface) mold with a solution of water and bleach, but precautions should be taken. For specific instructions, please refer to FEMA at http://www.fema.gov/diz00/d1345n06.shtm. Mold that is not visible however may require professional remediation.

By eliminating all of the mold that you can see, you may help your situation. However, this may not be the final solution since contamination may be originating from sources such as carpets, the inside of walls, air ducts, crawl spaces and sources outside of your home or building.