Mold Inspection NYC | Licensed Mold Testing Specialists
Prime Aire Mold Inspections provides licensed visual assessments, air and surface sampling, and independent lab-verified reports for residential and commercial properties across the five boroughs and the wider tri-state area.
Indoor mold exposure is linked to respiratory symptoms and worsened asthma, according to the EPA’s guidance on mold and health.
| NYS Mold Assessor License #24-6AY5I-SHMO | 20+ years serving NYC and NJ | 8000+ inspections completed | 4.8 stars on Google |
What Happens During a Mold Inspection in NYC?
- Visual assessment: A certified inspector walks the entire property, checking basements, attics, crawl spaces, behind appliances, and around HVAC units for moisture intrusion and visible growth.
- Moisture mapping: Moisture meters and, where needed, infrared thermal imaging locate water behind walls and ceilings that isn’t yet visible to the eye.
- Air and surface sampling: At least one indoor air sample is compared against an outdoor control sample to determine whether indoor mold spore counts are elevated. Surface swabs or tape lifts are taken from any suspect growth.
- Independent lab analysis: Samples go to a third-party, accredited laboratory so results can’t be influenced by whether more work gets sold afterward.
- Written report and protocol: You receive a report identifying the mold type, concentration, and affected areas, plus a remediation protocol if removal is needed.
- Remediation and water damage mitigation (if applicable): If mold or water damage is confirmed, Prime Aire can perform the remediation and mitigation work directly, following the protocol outlined in your report.
Learn more about how long mold remediation takes in our guide.
When You Need a Mold Inspection
You likely need an inspection if:
- You see mold on walls, ceilings, floors, or around windows
- A musty smell lingers after cleaning
- Your building had a leak, flood, or water damage in the past 12 months
- Someone in your household has unexplained respiratory, allergy, or asthma symptoms indoors
- You’re buying, selling, or renting out a property and want it cleared before closing
- You need clearance testing after remediation
- You manage a commercial building and need documentation for tenants, insurance, or litigation
Review and Testimonials
Providing the best mold inspection services NYC residents rely on to get fresh air back into the household.
Why Choose Prime Aire
- IICRC Certified technicians
- NYS Licensed Home Inspector(s) on staff
- Safe and environmentally friendly testing measures
- Independent, AIHA-accredited lab analysis known for accuracy and fast turnaround (48-72 hours)
- Serving NYC, New Jersey, and Connecticut for over 20 years
- Clear, plain-language reports you can hand directly to a remediation company or insurer
- 8,000+ completed projects
- Rapid response time / firsthand handling of floods, pipe bursts, water damage
- Satisfaction guarantee (90-day warranty)
- 95% first-pass clearance rate
- Thermal imaging included at no charge
- 4.8 stars on Google
Areas We Serve
Our Service Areas
Prime Aire serves the NYC Metro area, including all five boroughs (Manhattan, Brooklyn, Queens, the Bronx, and Staten Island), plus Westchester County, Nassau County, and Northern New Jersey.
Physical Locations:
- New York Location: 1710 1st Ave, New York, NY 10128
- Brooklyn Location: 185 Clymer Street #210, Brooklyn, NY 11211
What Does Mold Inspection Cost in NYC?
Mold inspection costs depend on property size and how many samples are needed.
| Service | Price |
| Full Mold Inspection (Includes 2 samples) | $389 |
| Additional Samples | $95 per sample |
| Mold Remediation | $10–$30 per square foot |
Equipment Rentals
|
|
Don't Wait Till Mold Spreads and Gets More Costly
Mold spreads faster than you think and the longer you wait the worse the problem gets, damaging your home’s structure and your families health.
FAQs about Mold Inspection and Testing
Here are answers to frequently asked questions about our mold services.
Most residential inspections take one to two hours. Larger homes or commercial properties with more square footage or complex HVAC systems can take longer.
No. Inspectors can typically work around occupants, though it helps to have access to all rooms, closets, and mechanical spaces.
Lab analysis for air and surface samples generally takes 2–3 business days.
Under NY State law, any mold project over 10 square feet requires a licensed assessor and remediator. NYC layers additional landlord obligations on top of that for multi-unit buildings.
"Inspection" refers to the full visual walkthrough and sampling process. "Testing" specifically refers to the air and surface sample analysis. Most companies, including Prime Aire, bundle both into one visit.